how to remove mapped network drive windows 10


Do you have a mapped network drive on your Windows 10 computer that you no longer need? If so, you may be wondering how to remove it. Mapped network drives are essentially shortcuts to network locations. You can map a network drive to quickly access it from your computer. While mapped network drives can be useful, there are also some good reasons to remove them. For example, if you no longer need access to the network location, or if you want to free up some space on your computer. In this blog post, we’ll show you how to remove a mapped network drive in Windows 10. We’ll also provide some tips and information about when and why you should remove mapped network drives.(Image Suggestion: How to Remove a Mapped Network Drive in Windows 10)

How to Remove Mapped Network Drive Windows

If you want to remove the mapped network drive in Windows 10, there are a couple of ways to do it. The first way is to use the “Unmap Network Drive” option from the “File Explorer” menu. This will unmap the network drive and make it unavailable for use.

The second way is to delete the network drive itself. To do this, open “File Explorer” and go to

– Click on “This PC” in the left pane

– Click on “Network Connections” in the right pane

– Right click on the desired network connection and select “Properties”.

In the properties window, click on “Advanced”. In the Advanced Properties window, under “%SystemRoot%\system32\drivers\etc”, delete everything after “.com”. For example, if your network connection name is “Ethernet 2”, then you would delete everything after “.com2”.

Mapped Network Drive Removal Process

If you are experiencing problems with your mapped network drive, there may be a solution. The process of removing the mapped network drive can vary depending on the version of Windows 10 that you are using, but it should generally be relatively easy to do. In this section, we will walk you through the steps required to remove a mapped network drive in Windows 10.

First, open the Start Menu and search for “Network Connections”. This should open up the Network Connections window. Next, right-click on the connection that you want to remove the map from and select “Properties”. This will open up the Properties window for that connection. In this window, click on the “Advanced” tab and then click on the “Remove Map…” button. This will open up a dialog box where you can specify how long you want Windows to keep track of this connection (in minutes). After specifying this information, click on OK to close out of these windows and proceed with removing the map from your computer.

If you are using Windows 10 version 1703 or later, the process of removing a mapped network drive will be very similar to that of earlier versions of Windows. First, open the Start Menu and search for “Network Connections”. This should open up the Network Connections window. Next, right-click on the connection that you want to remove the map from and select “Properties”. This will open up the Properties window for that connection. In this window, click on the “Advanced” tab and then click on the “Remove Map…” button. This will open up a dialog box where you can specify how long you want Windows to keep track of this connection (in minutes). After specifying this information, click on OK to close out of these windows and proceed with removing the map from your computer.

If you are using Windows 10 version 1607 or earlier, you may need to follow a different procedure in order to remove a mapped network drive. First, open the Start Menu and search for “Maps”. This should open up the Maps applet located at C\Users\YourUserName\AppData\LocalLow\Microsoft\Windows NT\DefaultWinsxs directory (where YourUserName is your user name). Next, right-click on an empty space inside the Maps applet and select the New Map… option from the contextual menu which will appear as shown in Figure 1 below.

Figure 1 Right clicking an empty space inside Maps Applet allows adding a new map

This will create a new .mapping file named after your computer name which contains all the necessary information about your current network location (IP address, hostname etc.). Next, copy this newly created mapping file over to \\\\share directory where is replaced by your actual computer name as shown in Figure 2 below.

Figure 2 Copying mapping file over to share directory

Detailed Instructions for Removing Mapped Drives

If you have a mapped network drive in Windows 10, you may be wondering how to remove it. This blog post will provide detailed instructions on how to do just that.

To start, open the “settings” app on your computer and click “system.” Under the “hardware and devices” section, you’ll see a list of all your hardware devices. Next, click on the entry for your mapped drive (usually named “Mapped Network Drive”). You’ll see a box below this that says “Connections.” Click on this box and select the option labeled “Remove Mapped Drive.” You’ll be prompted to confirm this action. Once you’ve removed the mapped drive from your computer, it’s now safe to delete it from Windows 10.

If you’re looking to permanently remove a mapped network drive from your computer, you’ll first need to disconnect it from the network. To do this, open the “settings” app on your computer and click “system.” Under the “hardware and devices” section, you’ll see a list of all your hardware devices. Next, click on the entry for your mapped drive (usually named “Mapped Network Drive”). You’ll see a box below this that says “Connections.” Click on this box and select the option labeled “Disconnect Mapped Drive.” You’ll be prompted to confirm this action. Once disconnected, delete the mapped drive from Windows 10.

Why You Should Remove Mapped Network Drives

If you’re like most people, you probably use mapped network drives on a regular basis. Mapped network drives are just like regular network drives, but they’re stored on your computer in the same location as your Windows operating system. This means that they’re always accessible, even if your computer is turned off or you don’t have an internet connection.

But there’s one problem with mapped network drives: they can be unreliable. Sometimes they’ll stop working altogether, and it can be a pain to constantly reconnect to them. Plus, you might find that you’ve wasted some storage space because of all the data that’s been stored in mapped network drives over the years.

So why keep them around at all? The best way to think about it is this: if you don’t need them, then it’s best to get rid of them. You’ll free up some storage space on your computer, and you’ll save time in the long run by not having to constantly troubleshoot mapped network drives.

When to Remove a Mapped Network Drive

If you’re experiencing any of the following problems, it’s time to remove your mapped network drive:

– You no longer need the drive.

– The drive is unavailable.

– You’re getting frequent connection errors.

– Mapped drives can slow down your computer.

When it’s time to remove a mapped network drive, follow these steps:

– Check the availability of the drive. If it’s not available or if you’re experiencing connection errors, then it’s time to remove the drive.

– Remove the mapped network drive from your computer by following these simple steps.

Tips for Removing Mapped Drives

If you’re ever having trouble removing a mapped drive from your computer, there are a few tips that can help. First, open File Explorer and select This PC. Next, select Map network drive from the ribbon. Select the drive letter you want to remove, then select Disconnect. If prompted, enter your user name and password for the network resource. Finally, if you want to keep the drive on your computer after disconnecting it from the network, choose Keep connected when prompted.

One other thing to note is that if you’re having trouble connecting to a mapped drive because of an antivirus software update or another problem with Windows 10 networking, try rebooting your computer after disconnecting the map service first.

Tools for Removing Mapped Drives

Mapped drives are a common problem on Windows 10. They can be difficult to remove, and sometimes they can cause problems with your computer. In this section, we’ll show you how to remove mapped drives in Windows 10. We also include some tools that can help you remove mapped drives more easily.

To remove a mapped drive in Windows 10, follow these steps:

1. Open the Start menu, and search for “Mapped drives.” Click on the result that appears, and then click on “Remove mapping.”

2. You’ll be asked to confirm your action. Click on “Remove mapping.”

If you’re having trouble removing a mapped drive, we recommend using one of our tools. One tool is Drive Manager (https://www.drivemanager.com/), which is available as a free trial from Microsoft. Drive Manager can help you remove mapped drives more easily by identifying and repairing any problems with them.

FAQs About Removing Mappednetwork Drives

If you’re using Windows 10, you can remove a mapped network drive. This can be helpful if you don’t need the drive anymore, or if you want to free up space on your computer. Here are some of the benefits and drawbacks of removing a mapped network drive:

The benefits of removing a mapped network drive include freeing up space on your computer, preventing data from being stored locally on your computer, and improving performance. The drawback is that you may lose any data that was previously stored on the mapped network drive.

There are several ways to remove a mapped network drive in Windows 10: through the Control Panel, through PowerShell cmdlets, or by using Microsoft Graph API calls. You can also prevent deleting a mapreduced Network Drive by setting its protection level to ‘Hidden’.

To remove a mapped network drive in the Control Panel, go to the ‘Network and Sharing Center’. In the left-hand pane, click ‘Change adapter settings’. In the right-hand pane, select the mapped network drive that you want to remove. Click the ‘Remove from list’ button.

If you’re using PowerShell cmdlets, you can remove a mapped network drive by calling the Remove-MappedDrive cmdlet. To prevent deleting a mapreduced Network Drive, set its protection level to ‘Hidden’.

To remove a mapped network drive using Microsoft Graph API calls, first create an instance of the MapReduceNetworkDrive object. Then call the Remove method of this object.

To Wrap Up

Mapped network drives are shortcuts to network locations. You can map a network drive to quickly access it from your computer. While mapped network drives can be useful, there are also some good reasons to remove them. Use the tips in this blog post to easily remove a mapped network drive from your Windows 10 computer.


Leave a Reply

Your email address will not be published.